Ing. Rama Abu-Alghanam

A master tgesis with the topic "Proof of a Spur Powering Concept for Etgernet-APL Field Switch considering the Intrinsic Safety Techniques"

Tasks done during this work: - Design laboratory experiments for the subject ”Electronics Cooling”. - Simulation, PCB redesign and fabrication, in addition to implementation of a double pulse test (dynamic testing of a power MOSFET). - Implementation of thermal calculations on a resistor attached to a heat sink with natural and forced flow. - Conducting calibration tests on different housings of the same power MOSFET.

Working at German Jordanian University (GJU) on (DESIRE) Erasmus Program Project funded by the European Commission, which stands for; Development of Higher Education Teaching Modules on the Socio-Economic Impact of the Renewable Energy Implementation. Since German Jordanian University is the project manager and initiator in this project, I am one of the Technical administrative staff work on this project.

Worked as a site trainee on a project for installing a 2.3MW Photovoltaic system.

Worked at the Department of Research and Advanced Development on my Bachelor Thesis with the topic of “Design & Implementation of a Low Cost Spectrometer with a Micro-controller”. Throughou the bachelor thesis, a low cost spectrometer was designed and implemented using a diffraction grating and a phtotodiode sensor array. A STM32 microcontroller was used to receive the data from the sensor array. Robotic Operating System (ROS) was used for the interfacing.

Worked at the Department of Developing Equipment of Heating Systems for Cars. (Application Engineering Car OE)

It was a cross-training at Jordan Electric Power Company (JEPCO) which responsible for transmission and distribution of the electricity to the middle area of Jordan.

Studying for my master in Electrical and Electronics Engineering at Kempten University of Applied Sciences.

Was an exchange student in Electrical Engineering for one and half years (Three semesters) at Jade University of Applied Sciences as a mandatory exchange program offered by my home university (German Jordanian University).

The study program of energy engineering offers the opportunity to gain knowledge of and usage skills required for conversion, production, transfer, distribution and use of energy. The field Electrical Power Engineering introduces to the electronics and power electronics world.